OPTION Carta telematica CloudGate
Functions of Option CloudGate Telematics Card
The Telematics Card allows the CloudGate Intelligent M2M Gateway to be used in advanced industrial telematics applications. The board can accept a range of Option or 3rd party developed I/O expanders that match the card and I/O connector to specific applications.
The base card (CG1106) adds a 3 axis accelerometer with hardware motion detection, dual SIM slots for a backup or roaming SIM card as well as the primary SIM card, USB and USB on the go ports and a DTE DB9 serial port with power over serial support.
The optional I/O expander piggy back board exposes a range of different I/O options including a second serial port, analog and digital inputs and digital outputs. Using different I/O expanders different levels of isolation and voltage ranges can be achieved. I/O Expander including CAN bus is also available. Other I/0 configurations including relays, isolated inputs, etc. can be developed on request.
Field of application for Option CloudGate Telematics Card / Key functions
Telematics base board (CG1106-11957)
USB type A
- Allows connection of USB 2.0 HS host devices
- Power switch and over-current protected
USB OTG microAB-type
- Allows connection of USB 2.0 HS host and slave devices
- Power switch and over-current protected
9 pin DB9 serial
- RTS/CTS DSR/DTR flow control
- DCD/RI available on some models of CloudGate (inquire for more details)
- DTE interface
- Supply voltage available via pin 9 (jumper selectable)
3 axis accelerometer
- ±2g/±4g/±8g, 3-Axis, 12-Bit Digital Accelerometer
2 SIM sockets
- Adds SIM backup/roaming SIM functionality to CloudGate
Operating temperature
- -30 to +70°C
Humidity (operational)
- 5 to 95% RH, non-condensing
Storage temperature
- -40 to +85°C
Telematics card with I/O Expander (CG5106-11983)
Telematics card with I/O Expander
- ‘Molex type’ connector, 18 pin
- 5 digital inputs (-/+ 32V)
- 2 analog inputs (0V to 10V, 12 bits resolution)
- 6 digital output (push-pull 0V to 3.3V OR open collector 0V to 30V/250mA@0.5V)
- Auxiliary serial port (RX/TX/CTS/RTS, takes 2 digital inputs & 2 digital outputs)
- 1-wire interface
- 4 GND
Other I/O Expander boards
- Other I/O configurations including relays, isolated inputs, CAN bus, etc. on request.
Telematics card with CAN I/O Expander (CG5106-11984)
Telematics card with CAN bus & I/O Expander
- ‘Molex type’ connector, 18 pin
- 5 digital inputs (-/+32V)
- 2 analog inputs (0V to 10V, 12 bits resolution)
- 4 digital output (push-pull 0V to 3.3V OR open collector 0V to 30V/250mA@0.5V)
- Auxiliary serial port (RX/TX/CTS/RTS, takes 2 digital inputs & 2 digital outputs)
- 1-wire interface
- 4 GND
- CAN bus interface
Other I/O Expander boards
- Other I/O configurations including relays, isolated inputs, etc. on request.
Technical specifications
- Adds flexible I/O and connectivity for industrial telematics applications to CloudGate
- Built in 3 axis accelerometer for movement detection and other applications
- Dual SIM card reader for backup or roaming SIM
- Built in microcontroller offloads all I/O from CloudGate
| Opzione senza fili: | Wifi |
|---|
Richiedi un preventivo
Compila il modulo qui sotto per ricevere un preventivo gratuito.
Compila il modulo qui sotto per ricevere un preventivo gratuito.